!
Audio output button (*3)
Turns on/off the audio transmission (play audio from the PC on the camera speaker). This button will be displayed only when "Audio output" or "Interactive" is selected for "Audio mode" on the setup menu.
(☞ page 40)
The button blinks while the audio transmission is being carried out.
When this button is clicked, the button will turn into
the 
button and audio from the PC will not be heard.
Audio volume can be adjusted (Low/Middle/High) by
moving the volume cursor 
.
Notes:
•When a user is using the audio transmission func- tion, the receiver button and the transmission button will be inoperable for the other users.
•Possible duration of audio transmission is up to 5 minutes per transmission. When 5 minutes have passed, the audio transmission function will be can- celed and the audio reception function will automati- cally be turned on. To turn the audio transmission function on, click the transmission button again.
•When the camera is restarted, the adjusted volume level (for both the audio transmission and reception) will return to the level that had been set on the [Audio] tab on the setup menu. (☞ page 40)
•Actual volume level will change in three steps even though the volume cursor can be adjusted minutely.
@
SD recording status indicator
The status of the SD recording can be checked with this indicator.
When the SD recording starts, this indicator will light red. When the SD recording stops, this indicator will go off.
This indicator will be displayed only when "Manual" is selected for "Save trigger" on the setup menu. (☞ page 22)
@1Main area (*2)
Images from the camera will be displayed in this area.
The current time and date will be displayed at the selected position in the time and date format set on the setup menu. (☞ pages 19 and 20).
Click a desired point in the main area on the "Live" page that is to be the center of the angle of view. The camera moves to adjust the position in order to set the clicked point as the center. Zoom can be adjusted using the mouse wheel.
Note:
When an image is displayed at 22x, the clicked point may not always be located at the center of the dis- played image.
Important:
When the camera position is moved inadvertently while the power of the camera is on, restart the cam- era (restart) or refresh the camera position (position refresh) on the [Initialization] tab of the "Maintenance" page (☞ page 68).
*1 Only operable by users whose access level is "1. Administrator"
*2 Only operable by users whose access level is "1. Administrator" or "2. Camera control" when "ON" is selected for "User authentication" (☞ page 54).
*3 Operable by users who belong to the access level selected for "Authentication" on the [Audio] tab of the "Camera setup" page (☞ page 40).
Refer to page 55 for further information about the access level.
Note:
When operated by a lower access level user, images displayed on the screen may be changed temporarily. This does not affect operation of the camera.
8
