N-Tron 708M12 user manual Show or Set CIP Configuration, Cip -enable -disable -show, Cip -show

Show or Set CIP Configuration

Command Name		Cip
Description		Show or set CIP configuration. If no parameters are specified, this command will show
		the CIP configuration (same as -show parameter).
Syntax		-Cip [-e[nable] -d[isable] -show]
Parameters		-Cip -show
		Show CIP configuration.
		-Cip [-e[nable] -d[isable]]
		Set the CIP status to e(nabled) or d(isabled).
Examples		N-TRON/Admin> cip -show
		CIP Configuration:
	------------------
		Status:	Enabled
		EthIp Interval:	10 ms
		Cache Interval:	2000 ms
		Identity Information:
	---------------------
		Product Name:	N-TRON 708M12
		Vendor:	1006 (N-TRON)
		Device Type:	0x0C (Communications Adapter)
		Major Revision:	1
		Minor Revision:	2
		Serial Number:	0xAFFBE400
		Connection Information:
	-----------------------
		Multicast Connections:	0
		Unicast Connections:	0
		N-TRON/Admin> cip -disable
		Changing CIP configuration...
		CIP Configuration:
	------------------
		Status:	Disabled
		EthIp Interval:	10 ms
		Cache Interval:	2000 ms
		Identity Information:
	---------------------
		Product Name:	N-TRON 708M12
		Vendor:	1006 (N-TRON)
		Device Type:	0x0C (Communications Adapter)
		Major Revision:	1
		Minor Revision:	2
		Serial Number:	0xAFFBE400
		Connection Information:
	-----------------------
		Multicast Connections:	0
		Unicast Connections:	0

Changes have been made that have not been saved.

N-TRON/Admin>

NOTES

(Revised 2010-11-15) Page 129 of 156