N-Tron 708M12 user manual 154

<OtherHex>0102de03ad00be09ef</OtherHex> <!-- 255*2 character limit --> </ClientID>

</IPConfiguration>

<!-- ______________________________________________________________________________________ -->

<!-- User	management -->
<!-- A list of logon accounts (5 maximum) to add to the switch. -->
<Users mode="keep or delete">		<!-- mode must be "keep" or "delete" -->
<!--	mode=delete - delete existing accounts before adding accounts (default) -->
<!--	mode=keep - do not delete existing accounts before adding accounts -->
<!--	All User elements (name, password, access) are required. -->

<User>
<Name>Joe</Name>	<!-- 3-15	character	limit -->
<Password>xxx</Password>	<!-- 3-15	character	limit -->
<Access>admin OR user</Access>	<!-- Access must be		admin or user -->
</User>
</Users>

<!-- ______________________________________________________________________________________ -->

<!-- Port configuration -->
<!-- You may uses this block to define port VLAN identifiers (PVIDs) -->
<Ports>
<ValidatePorts>yes OR no</ValidatePorts> <!-- optional --><!-- Must be yes(default)
	or no. If no, invalid ports are ignored. -->
<!-- Use PortNumber or PortName -->
<Port>
<PortNumber>4</PortNumber> <!-- PortNumber ranges from 1 to the maximum port
	number for the switch -->
<PVID>1</PVID>	<!-- PVID ranges from 1 to 4094 -->
</Port>
<Port>
<PortName>TX6</PortName>	<!-- Name of port on switch -->
<PVID>26</PVID>	<!-- PVID ranges from 1 to 4094 -->
</Port>
</Ports>

<!-- ______________________________________________________________________________________ -->

<!-- DHCP	server -->
<DHCPServer mode="keep or delete">			<!-- mode must be "keep" or "delete" -->
<!--	mode=delete - delete existing profiles before adding profiles (default) -->
<!--	mode=keep - do not delete existing profiles before adding profiles -->
<Enabled>yes OR no</Enabled>			<!-- Enabled must be yes or no -->
<!--	If the server is enabled (enabled=yes), you can add DHCP server profiles.
(If not enabled, can not add profiles.) -->
<Profile>
	<!-- Required: Name, LowIP, HighIP,			LeaseDays. LeaseHours is optional, and
	defaults to 0. -->
	<Name>prof1</Name>		<!--	required -->	<!-- 19 character limit -->
	<LowIP>192.168.2.1</LowIP>		<!--	required -->
	<HighIP>192.168.2.254</HighIP> <!--			required -->
	<LeaseDays>28</LeaseDays>		<!--	required -->
	<LeaseHours>0</LeaseHours>		<!--	optional -->
	<!--The Advanced block is optional,			and all elements within the block are
	optional.-->
	<Advanced>	<!-- optional -->

<!-- All elements below are optional -->

<BroadcastAddress>192.168.2.255</BroadcastAddress>

(Revised 2010-11-15) Page 154 of 156