N-Tron 708M12 user manual Set or Show the System IP Configuration

CLI Commands, Continued…

Set or Show the System IP Configuration

Command Name	Sysip
Description	Set system IP configuration mode, IP address, subnet mask, and gateway
	If no parameters are specified, this command will show the system IP addresses. Static
	IP, subnet mask, or gateway can be set while in either DHCP or static configuration
	mode as they will be used with IP fallback when in DHCP mode. If the Static IP is set to
	the default system IP address, IP fallback will not occur. All system addresses must be
	formatted as: xxx.xxx.xxx.xxx.
Syntax	sysip [-c config_mode] [-i static_ip] [-s static_subnet_mask] [-g static_gateway]
Parameters	-c config_mode
	s(tatic) or d(hcp).
	-i static_ip
	Static IP address (for static config mode and IP fallback ).
	-s static_subnet_mask
	Static sub net mask (for static config mode and IP fallback ).
	-g static_gateway
	Static gateway address ( for static config mode and IP fallback ).
Example	N-TRON/Admin> sysip
	IP Configuration Mode : Static
	Static IP Address	: 192.168.1.225
	Static subnet Mask	: 255.255.255.0
	Static gateway	: 192.168.1.1
	N-TRON/Admin> sysip -c dhcp
	IP Configuration Mode : DHCP (has been changed)
	Fallback IP Address	: 192.168.1.225
	Fallback Subnet Mask	: 255.255.255.0
	Fallback Gateway	: 192.168.1.1
	Press <ENTER> to Save Changes and Restart the System Now
	…
	N-TRON/Admin> sysip -i 192.168.2.119 -s 255.255.252.0 -g
	192.168.1.1
	IP Configuration Mode : Static
	Static IP Address	: 192.168.2.119 (has been changed)
	Static Subnet Mask	: 255.255.252.0 (has been changed)
	Static Gateway	: 192.168.1.1 (has been changed)
	Press <ENTER> to Save Changes and Restart the System Now
	…
NOTES	If mode is set to DHCP and IP fallback occurs, DHCP requests will stop.
	If mode is set to DHCP and IP Configuration is retrieved from a DHCP server, IP
	fallback will not occur, even if lease is lost.

(Revised 2010-11-15) Page 137 of 156