N-Tron 708M12 user manual Show or Set Mirror Configuration, Dp portno, Tx portlist, Rx portlist

CLI Commands, Continued…

Show or Set Mirror Configuration

Command Name	Mirror
Description	Show or set Mirror configuration. If no parameters are specified, this command will
	show the Mirror configuration (same as -show parameter).
Syntax	mirror [-show] [-status state] [-dp portno] [-tx portlist] [-rx portlist]
Parameters	-show
	Show configuration.
	-status state
	Set the Mirror status to e(nabled) or d(isabled).
	-dp portno
	Set the destination port number for mirrored frames.
	-tx portlist
	Set the source ports to mirror frames that are transmitted.
	-rx portlist
	Set the source ports to mirror frames that are received.
Examples	N-TRON/Admin> mirror –show
	Mirror Status	: Disabled
	Destination Port : TX1
	Tx Source Ports	: (None)
	Rx Source Ports	: (None)
	N-TRON/Admin> mirror –status enabled –dp 6 –tx 1,3-5 –rx 1,3,5
	Mirror Status	: Enabled
	Destination Port : TX6
	Tx Source Ports	: TX1, TX3-TX5
	Rx Source Ports	: TX1, TX3, TX5
	Changes have been made that have not been saved.
	…
NOTES	The portlist consists of port numbers and ranges, separated by commas. It may not
	contain space characters. Use ―all‖ to set all ports as source ports, and use ―none‖ to clear
	all ports from source ports.

(Revised 2010-11-15) Page 131 of 156