DHCP – Server – Setup IP Maps, Continued…
The Static Range type of mapping is used to create a range of static IP addresses dedicated to specific ports on a relay agent switch. There are two different data entry formats available according to whether the relay agent type is for an
To create a range of static IP addresses on an
Network Profile
An existing network profile to which the IP map applies.
Relay Agent Type
Should be set to
Switch Model
List of
Remote ID
A unique identifier that designates the
Add
Checkbox used to add an IP map for the corresponding port.
Port No
The actual port number.
Port Name
Descriptive name of the port.
VLAN
VLAN ID that the port is a member of.
Circuit ID
IP Address
IP address to assign to the IP map.
(Revised | Page 35 of 156 |
