Show or Set System Configuration

Command Name	System
Description	Show or set System configuration. If no parameters are specified, this command will
	show the System configuration (same as -show parameter).
Syntax	system [-show] [-name label] [-browser state]
Parameters	-show
	Show configuration.
	-name label
	Set the switch name.
	-browser state
	Set the browser access status to e(nabled) or d(isabled).
Examples	N-TRON/Admin> system -name "Private Switch" -browser disabled
	IP Configuration : Static
	Client ID (hex)	: 0007affbe400
	IP Address	: 192.168.2.214
	Subnet Mask	: 255.255.255.0
	Gateway	: 192.168.1.9
	MAC Address	: 00:07:af:fb:e4:00
	System Up Time	: 0 days, 0 hours, 17 mins, 2 secs
	Name	: Private Switch
	Contact	: N-TRON Admin
	Location	: Mobile, AL 36609
	Browser Access	: Disabled
	Changes have been made that have not been saved.
	N-TRON/Admin>
NOTES	A switch name may only contain alphanumeric, space, ‗:‘, ‗-‗, ‗_‘, and ‗#‘ characters, and
	may not begin with a number, space, or underscore. A name with embedded space
	characters must be enclosed in quotes.

Page 138 of 156

N-Tron 708M12 user manual Show or Set System Configuration, Characters must be enclosed in quotes