N-Tron 708M12 user manual 155

<DomainName>N-TRON.com</DomainName>	<!-- 63 character limit -->
<DNSServer1>192.168.2.10</DNSServer1>
<DNSServer2>192.168.2.11</DNSServer2>
<Gateway1>192.168.2.1</Gateway1>
<Gateway2>192.168.2.2</Gateway2>
</Advanced>

<IPMaps>

<!-- The DynamicRange is the only IP Map supported. You may have 0 or more. --> <DynamicRange>

<!-- low and high within range of profile -->

<LowIP>192.168.2.1</LowIP> <!-- required -->

<HighIP>192.168.2.4</HighIP> <!-- required --> </DynamicRange>

</IPMaps>

</Profile>

</DHCPServer>

<!-- ______________________________________________________________________________________ -->

<!-- MAC security -->
<MACSecurity>
<Mode>learning OR locked</Mode>	<!--	Mode must be learning or locked	-->
<!-- Authorized entries -->
<Authorized mode="keep or delete">	<!--	mode must be "keep" or "delete"	-->
<!-- mode=delete - delete		existing authorized MACs before	adding

authorized MACs (default) -->

<!-- mode=keep - do not delete existing authorized MACs before adding authorized MACs -->

<ValidatePorts>yes OR no</ValidatePorts> <!-- optional -->

<!-- Must be yes(default) or no.

If no, invalid ports are ignored. -->

<Entry>
<MACAddress>00:07:af:ff:5b:c0</MACAddress>		<!-- 17 character limit -->
<!-- MAC is valid on all ports listed in the ports list.
If the ports list is missing, then the MAC is valid on all ports. -->
<Ports>
<Port>
<!-- Use PortNumber or PortName -->
<PortNumber>4</PortNumber>	<!-- 1 to maximum port for switch -->
</Port>
<Port>
<PortName>TX5</PortName>	<!-- Name of port on switch -->
</Port>
</Ports>
</Entry>
<Entry>
<MACAddress>0007af1d6460</MACAddress>	<!-- Example of a MAC with no
	delimiters, valid on all ports. -->
</Entry>

</Authorized>

</MACSecurity> </SystemConfiguration>

(Revised 2010-11-15) Page 155 of 156