3Com MSR 30, MSR 50 manual If-match ipv6, Next-hop Matches the next hop of IPv6 routing information

1214 CHAPTER 80: IPV6 ROUTING POLICY CONFIGURATION COMMANDS

Examples # Display the statistics of all the IPv6 prefix lists.
	<Sysname> display ip ipv6-prefix
	Prefix-list6 abc
	Permitted 0
	Denied 0
	index:	10	permit	::/0
	index:	20	permit	::/1	ge 1 le 128
	Table 286 Description on the fields of the display ip ipv6-prefix command
	Field		Description
	Prefix-list6		Name of the IPv6 prefix list
	Permitted		Number of routes satisfying the match criterion
	Denied		Number of routes not satisfying the match criterion
	Index		Internal serial number of address prefix list
	Permit		Matching mode: permit, deny
::/1			IPv6 address and its prefix length for matching
	ge		greater-equal, the lower limit prefix length
	Le		less-equal, the upper limit prefix length

if-match ipv6

Syntax	if-match ipv6 { address next-hop route-source } { acl acl6-number prefix-list
	ipv6-prefix-name }
	undo if-match ipv6 { address next-hop route-source } [ acl prefix-list ]
View	Routing policy view
Parameters	address: Matches the destination address of IPv6 routing information.
	next-hop: Matches the next hop of IPv6 routing information.
	route-source: Matches the source address of IPv6 routing information.
	acl acl6-number: Specifies the number of an IPv6 ACL for filtering, in the range
	2000 to 3999 for address, and 2000 to 2999 for next-hopand route-source.
	prefix-listipv6-prefix-name: Specifies the name of a IPv6 prefix list for filtering, a
	string of 1 to 19 characters.
Description	Use the if-match ipv6 command to configure a destination, next hop or source
	address based match criterion for IPv6 routes.
	Use the undo if-match ipv6 command to remove the match criterion.
	The match criterion is not configured by default.
Examples	# Create a routing policy named policy1 with node 10, matching mode as permit.
	Define an if-match clause to permit the routing information whose next hop
	address matches IPv6 prefix list p1.