3Com MSR 50, MSR 30 manual Registrar ipv4, Register-enable off on, Undo register-enable

2703

register-enable

Syntax	register-enable { off on }
	undo register-enable
View	SIP client view
Parameter	off: Disables the SIP registration function.
	on: Enables the SIP registration function.
Description	Use the register-enable on command to enable the SIP registration function.
	Use the register-enable off command or the undo register-enablecommand
	to disable the SIP registration function.
	By default, the SIP registration function is disabled.
Example	# Enable the SIP registration function.
	<Sysname> system-view
	[Sysname] voice-setup
	[Sysname-voice] sip
	[Sysname-voice-sip]sip-server master 169.54.5.10
	[Sysname-voice-sip] register-enable on

registrar ipv4

Syntax	registrar ipv4 ip-address[ port port-number] [ expires seconds ] [ slave ]
	undo registrar ipv4 [ slave ]
View	SIP client view
Parameter	ip-address: IP address of the registrar.
	port port-number: Port number of the registrar, in the range of 1 to 65535. The
	default port number is 5060.
	expires seconds: Aging time for registration in seconds, in the range of 60 to
	65,535. The default aging time is 3,600.
	slave: Specifies the registrar as a slave server.
Description	Use the registrar ipv4 command to configure registrar information on the SIP
	UA.
	Use the undo registrar ipv4 command to remove the registrar information from
	the SIP UA.