3Com MSR 50, MSR 30 manual Exclude Excludes the specified FEC, Include Includes the specified FEC

1529

	interface-typeinterface-number: Specifies an interface by its type and number.
	in-label-value: Value of the incoming label, in the range 0 to 1048575.
	out-label-value: Value of the outgoing label, in the range 0 to 1048575.
	exclude: Excludes the specified FEC.
	include: Includes the specified FEC.
	dest-addr: Destination address.
	mask-length: Length of the mask for the destination address, in the range 0 to 32.
	vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
	characters.
	asbr: Displays information about ASBR established LSPs.
	protocol: Displays information about LSPs established by a specified protocol.
	bgp: Displays information about BGP LSPs.
	bgp-ipv6: Displays information about IPv6 BGP LSPs, that is, BGP4+ LSPs.
	crldp: Displays information about LDP CR-LSPs.
	ldp: Displays information about LDP LSPs.
	rsvp-te: Displays information about CR-LSPs established by RSVP-TE.
	static: Displays information about static LSPs.
	static-cr: Displays information about static CR-LSPs.
	egress: Displays information about LSPs taking the current LSR as egress.
	ingress: Displays information about LSPs taking the current LSR as ingress.
	transit: Displays information about LSPs taking the current LSR as transit LSR.
	verbose: Displays detailed information.
Description	Use the display mpls lsp command to display information about LSPs.
	With no parameters specified, the command displays information about all LSPs.
Related command:	display mpls lsp, display mpls statistics lsp, display mpls static-lsp.
n	This command supports these interface types: serial interface, async interface,
	Layer 3 Ethernet interface (Ethernet interface, GE interface, and XGE interface),
	ATM interface, POS interface, Layer 3 virtual Ethernet interface (that is,
	virtual-Ethernet interface), virtual template, Mp-group interface, MFR interface,
	tunnel interface, and VLAN interface.