3Com MSR 50 119, Port Priority Configuration Commands, Qos priority, Undo qos priority, 1843

1843

119

PORT PRIORITY CONFIGURATION

COMMANDS

qos priority

Syntax qos priority priority-value

undo qos priority

View Ethernet interface view/port group view

Parameters priority-value: Port priority value, in the range 0 to 7. The default value is 0.

Description Use the qos priority command to configure the port priority of current port.

Use the undo qos priority command to restore to the default value.

Port group is supported if the number of the interfaces on a layer 2 module is 16, 24 or 48.

Execute the command in interface view, and the setting is effective on the current interface only. Execute the command in interface group view, and the setting is effective on all interfaces in the interface group.

Examples # Configure the Ethernet 1/0 priority to 2.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] qos priority 2