3Com MSR 30, MSR 50 manual Maximum load-balancing Ospf view, Maximum-routes

1140 CHAPTER 76: OSPF CONFIGURATION COMMANDS

Description Use the lsdb-overflow-limitcommand to specify the upper limit of external LSAs in the LSDB.

Use the undo lsdb-overflow-limitcommand to cancel limitation.

External LSAs in the LSDB are unlimited by default.

Examples # Specify the upper limit of external LSAs as 400000.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] lsdb-overflow-limit 400000

maximum load-balancing (OSPF view)

Syntax	maximum load-balancing maximum
	undo maximum load-balancing
View	OSPF view
Parameters	maximum: Maximum number of load-balanced routes, in the range 1 to 8. A
	maximum of 1 means no load balancing is enabled.
Description	Use the maximum load-balancingcommand to specify the maximum number
	of load-balanced routes.
	Use the undo maximum load-balancingcommand to restore the default.
Examples	# Specify the maximum number of load-balanced routes as 2.
	<Sysname> system-view
	[Sysname] ospf 100
	[Sysname-ospf-100] maximum load-balancing 2

maximum-routes

Syntax	maximum-routes { external inter intra } number
	undo maximum-routes { external inter intra }
View	OSPF view
Parameters	external: Specifies the maximum number of external routes.
	inter: Specifies the maximum number of inter-area routes.
	intra: Specifies the maximum number of intra-area routes.
	number: Maximum route number in the range 1 to 10000.