3Com MSR 30, MSR 50 manual Display mpls route-state, # Display all Nhlfe entries

1532 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS

View Any view

Parameters token: NHLFE entry index. The value range varies by device. include text: Specifies NHLFE entries including a specified string.

Description Use the display mpls nhlfe command to display information about the NHLFE table.

With the token argument not specified, the command displays information about all NHLFE entries.

Examples # Display information about a specified NHLFE entry.

<Sysname> display mpls nhlfe 2
Out-Interface	Token	Oper	Nexthop	Deep Stack

----------------------------------------------------------------------

S2/0	2	PUSH	88.1.1.2	1	1024
1 Record(s) Found
# Display all NHLFE entries.
<Sysname> display mpls nhlfe
Out-Interface	Token	Oper	Nexthop	Deep	Stack

----------------------------------------------------------------------

S2/0	2	PUSH	88.1.1.2	1	1024
1 Record(s) Found
Table 382 Description on the fields of the display mpls nhlfe command
Field			Description
Out-Interface			Outgoing interface
Token			NHLFE entry index
Oper			Operation type
Nexthop			Next hop
Deep			Depth of the MPLS label stack
Stack			MPLS label

display mpls route-state

Syntax display mpls route-state [ vpn-instance vpn-instance-name] [ dest-addr

mask-length ]

View Any view

Parameter vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31 characters.

dest-addr: Destination IP address.

mask-length: Length of the mask for the destination IP address, in the range 0 to 32.