3Com MSR 50, MSR 30 manual Get, 2381

2381

source ipv6 source-ipv6-address: Specifies a source IPv6 address for transmitted FTP packets. This address must be an IPv6 address that has been configured on the device.

-iinterface-typeinterface-number: Specifies the type and number of the egress interface. This parameter can be used only in case that the FTP server address is the link local address and the specified egress interface must have a link local address (For the configuration of link local address, see “IPv6 Basics Configuration Commands” on page 829).

Description Use the ftp ipv6 command to log onto the FTP server and enter FTP client view.

Note that:

■This command applies to IPv6 network.

■If you use this command without specifying any parameters, you will simply enter the FTP client view without logging onto the FTP server.

■If you specify the parameter, you will be asked to enter the username and password for accessing the FTP server.

Example # Log onto the FTP server with IPv6 address 3000::200

<Sysname> ftp ipv6 3000::200

Trying 3000::200 ...

Press CTRL+K to abort

Connected to 3000::200.

220Welcome! User(3000::200:(none)): MY_NAME

331Please specify the password. Password:

230Login successful. [ftp]

get

Syntax get remotefile [ localfile ]

View FTP client view

Parameter remotefile: File name on the remote FTP server.

localfile: Local file name.

Description Use the get command to download a file from a remote FTP server and save it.

If no name is specified, the local file uses the name of the source file on the FTP server by default.

Example # Download file testcfg.cfg and save it as aa.cfg.

[ftp]get testcfg.cfg aa.cfg