3Com MSR 30, MSR 50 manual Description on the fields of the display mfr command, Lid

382CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS

Table 50 Description on the fields of the display mfr command

Field	Description
Bundle interface	Bundle interface
Bundle state	Operating state of the bundle interface.
Bundle class	Class A indicates if there is one bundle link is in up state,
	the bundle is flagged as up. Moreover, all bundle links
	should be tagged as down before the bundle is down.
fragment disabled	Indicates whether the fragment is disabled (disabled in this
	sample output)
MFR bundle fragment size	Maximum fragment size allowed by the FR link
Bundle name	Name of multilink frame relay bundle
Bundle links	Physical interfaces of the links in the bundle.
Serial2/0, PHY state = up, link	Physical interface on the bundle link, the operating state of
state = up, Link name = Serial2/0	the physical layer interface and link layer interface, the link
	name of the bundle link (corresponding name on the
	physical interface by default)

# Display detailed state information about all frame relay bundle links.

<Sysname> display mfr verbose

Bundle interface:MFR1, Bundle state = up, Bundle class = A,

fragment enabled, MFR bundle fragment size = 222

original packet be assembled/fragmentized (in/out): 0/0

dropped fragment (in/out): 0/0
Bundle name = 2
Bundle links:
LID : Serial2/0	Peer LID: Serial2/0
Bound to MFR1(BID:2)
Physical state: up, link state: up,
Bundle link fragment size: 222,
Bundle Link statistics:
Hello(TX/RX):		10/10	Hello_ack(TX/RX):	10/10
Add_link(TX/RX):		4/2	Add_link_ack(TX/RX):	2/1
Add_link_rej(TX/RX):		0/0
Remove_link(TX/RX):		0/0	Remove_link_ack(TX/RX):	0/0
Pkts dropped(in/out):		0/0
Timer: ACK	4, Hello	10
Retry: Max	2, Current 0
Cause code: none
Bundle Link fragment statistics:
Mfr fragment(in/out): 0/0
Table 51 Description on the fields of the display mfr verbose command
Field	Description
LID	Identifier of the bundle link (to be the name of corresponding
	physical interface by default)
Peer LID	Identifier of the peer bundle link (to be the name of
	corresponding physical interface by default).
Bound to MFR0 (BID:MFR0)	The bundle link is bound to MFR0 on the interface MFR
Physical state	Operating state of the physical interface.
link state	Operating state of the link protocol on the bundle link.
Bundle Link statistics:	Statistics about the packets on the bundle link.