3Com MSR 30, MSR 50 manual Mirroring-group mirroring-port, Undo mirroring-group groupid local

498CHAPTER 30: PORT MIRRORING CONFIGURATION COMMANDS

undo mirroring-group { groupid local }

View System view

Parameter groupid: Port mirroring group number. The value range is 1 to 5 for MSR 20 and BSR 30 series routers and 1 to 10 for MSR 50 series routers.

local: Creates a local port mirroring group/removes all local port mirroring groups.

Description Use the mirroring-groupcommand to create a port mirroring group.

Use the undo mirroring-groupcommand to remove the specified port mirroring group or all local port mirroring groups.

Example # Create a local port mirroring group numbered 1.

<Sysname> system-view

[Sysname] mirroring-group 1 local

mirroring-group mirroring-port

Syntax mirroring-group groupid mirroring-port mirroring-port-list{ both inbound outbound }

undo mirroring-group groupid mirroring-port mirroring-port-list{ both inbound outbound }

View System view

Parameter groupid: Port mirroring group number. The value range is 1 to 5 for MSR 20 and BSR 30 series routers and 1 to 10 for MSR 50 series routers.

mirroring-port-list: List of ports to be added to the port mirroring group. You can specify multiple ports by providing this argument in the form of { interface-typeinterface-number[ to interface-typeinterface-number] }&<1-8>, where the interface-typeargument is port type, the interface-numberargument is the port number, and &<1-8> means that you can provide up to eight port indexes/port index lists for this argument.

both: Specifies to mirror both inbound and outbound packets.

inbound: Specifies to mirror inbound packets only.

outbound: Specifies to mirror outbound packets only.

Description Use the mirroring-groupmirroring-portcommand to add ports to a port mirroring group as source ports.

Use the undo mirroring-group mirroring-port command to remove source ports from a port mirroring group.