3Com MSR 50 manual Reset voice fax statistics, Voip h323-conf tcs-t38, Undo voip h323-conf tcs-t38

2689

reset voice fax statistics

Syntax	reset voice fax statistics
View	User view
Parameter	None
Description	Use the reset voice fax statistics command to clear FoIP statistics.
Example	# Clear FoIP statistics.
	<Sysname> reset voice fax statistics

voip h323-conf tcs-t38

Syntax	voip h323-conf tcs-t38
	undo voip h323-conf tcs-t38
View	Voice view
Parameter	None
Description	Use the voip h323-conftcs-t38command to enable the voice gateway in H.323
	slow-start mode to contain the T.38 capability description in its capability set.
	Use the undo voip h323-conftcs-t38command to disable the voice gateway in
	H.323 slow-start mode from containing the T.38 capability description in its
	capability set.
	By default, T.38 capability description is contained.
	Because NetMeeting does not support T.38 capability description parsing, you
	must disable the voice gateway in H.323 slow-start mode from containing the T.38
	capability description in its capability set to interwork with NetMeeting.
n	■ This command has global significance. The execution of this command can
	enable all voice entities to contain the T.38 capability description in their
	capability sets.
	■ Because NetMeeting does not support T.38 capability description parsing, you
	must configure the voip h323-conftcs-t38command before interworking
	with NetMeeting.
	■ If interworking with NetMeeting is required for a voice entity, you can disable
	fax using the fax baudrate disable command or set the fax mode to a
	non-T.38 mode (pcm).