3Com MSR 30, MSR 50 manual Mfr fragment-size, Syntax mfr fragment Undo mfr fragment

402CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS

Use the undo mfr bundle-namecommand to restore the default.

By default, BID is represented by mfr plus frame relay bundle number, for example, mfr4.

Each MFR bundle has a BID, which only has local significance. Therefore, the same

BID can be used at both ends of the link.

Note that:

■In spite of the default BID, you cannot configure a BID as a string in the form of mfr + number.

■After changing the BID of an MFR interface, you must execute the shutdown and undo shutdown command on the interface to validate the new BID.

Example # Set the frame relay link MFR4 BID to bundle1.

<Sysname> system-view

[Sysname] interface mfr 4

[Sysname-MFR4] mfr bundle-name bundle1

mfr fragment

Syntax mfr fragment

undo mfr fragment

View MFR interface view

Parameter None

Description Use the mfr fragment command to enable fragmentation on the MFR bundle.

Use the undo mfr fragment command to disable the function.

By default, fragmentation is disabled on the MFR bundle.

Example # Enable fragmentation on interface MFR 4.

<Sysname> system-view

[Sysname] interface mfr 4

[Sysname-MFR4] mfr fragment

mfr fragment-size

Syntax mfr fragment-size bytes

undo mfr fragment-size

View Frame relay interface view and MFR interface view