3Com MSR 30, MSR 50 manual Link Aggregation Debugging Commands

484CHAPTER 28: LINK AGGREGATION DEBUGGING COMMANDS

Table 76 Description on the fields of the debugging lacp packet command

Field	Description
Actor	Local port information carried in the protocol
	packet, which contains the following fields.
	■ tlv: A value of 1 indicates that the
	information is about the local port.
	■ len: The length of the Actor information.
	■ sys-pri: The LACP priority of the system
	where the local port resides.
	■ sys-mac: The system MAC address of the
	system where the local port resides.
	■ key: The value of the operation key of the
	local port.
	■ pri: The LACP priority of the local port.
	■ p: The local port number.
	■ state: The current LACP state of the local
	port.
Partner	Peer port information carried in the protocol
	packet, which contains the following fields.
	■ tlv: A value of 2 indicates that the
	information is about the peer port.
	■ len: The length of the Partner information.
	■ sys-pri: The LACP priority of the system
	where the peer port resides.
	■ sys-mac: The system MAC address of the
	system where the peer port resides.
	■ key: The value of the operation key of the
	peer port.
	■ pri: The LACP priority of the peer port.
	■ p: The peer port number.
	■ state: The current LACP state of the peer
	port.
Collector	The content of the Collector field carried in
	the protocol packet, which contains the
	following fields.
	■ tlv: A value of 3 indicates the Collector
	field.
	■ len: The length of the Collector field.
	■ col-max-delay: The maximum delay.
Terminator	The content of the Terminator field carried in
	the protocol packet, which contains the
	following fields.
	■ tlv: A value of 0 indicates the Terminator
	field, which marks the end of the protocol
	packet.
	■ len: The length of the Terminator field.

Examples # Enable debugging for LACP protocol packets on Ethernet 1/1 to view the information about LACP protocol packet sending/receiving of the port.