3Com MSR 30, MSR 50 manual Device received an Lacp protocol packet through Ethernet 1/1

486CHAPTER 28: LINK AGGREGATION DEBUGGING COMMANDS

//The device received an LACP protocol packet through Ethernet 1/1.

*0.1221133 Sysname LAGG/8/Pkt:

size=128, subtype =1, version=1

//The length of the LACP packet was 128 bytes, the protocol sub type was 1, and the version number was 1.

Actor: tlv=1, len=20, sys-pri=0x8000, sys-mac=00e0-fc00-0000, key=0x

1, pri=0x8000, p=0x6, state=0x3d

// The local port information carried in the packet was as follows:

■length: 20

■system LACP priority: 0x8000

■system MAC address: 00e0-fc00-0000

■port operation key: 0x1

■port LACP priority: 0x8000

■port number: 0x6

■current LACP state flag of the port: 0x3d

Partner: tlv=2, len=20, sys-pri=0x8000, sys-mac=00e0-fc02-0300, key=

0x1, pri=0x8000, p=0x1, state=0xd

// The peer port information carried in the packet was as follows:

■length: 20

■system LACP priority: 0x0

■system MAC address: 00e0-fc02-0300

■port operation key: 0x1

■port LACP priority: 0x8000

■port number: 0x1

■current LACP state flag of the port: 0xd

Collector: tlv=3, len=16, col-max-delay=0

// The content of the Collector field in the protocol packet was as follows:

■length: 16

■maximum delay: 0

Terminator: tlv=0, len=0

// The length of the Terminator field in the protocol packet is 0.

n Other similar LACP protocol packet information is omitted here.