3Com MSR 30, MSR 50 manual Display poe device, Display poe interface, Pse Id

2486 CHAPTER 166: POE CONFIGURATION COMMANDS

display poe device

Syntax	display poe device
View	Any view
Parameter	None
Description	Use the display poe device command to display the mapping between ID,
	module, and slot of the power sourcing equipment (PSE).

Example # Display the mapping between ID, module, and slot of each PSE. (The information displayed varies with devices.)

<Sysname> display poe device
PSE ID	SlotNo PortNum		MaxPower(W)	State	Model
5	5	24	200	on	LSBMGV48TP
6	6	16	200	on	LSB1GV48
Table 639 Description on fields of the display poe device command
Field				Description
PSE ID				ID of the PSE
SlotNo				Slot number of the PSE
PortNum				Number of PoE interfaces on the PSE
MaxPower(W)				Maximum power of the PSE (W)
State				PSE state:
				on: The PSE is supplying power.
				off: The PSE stops supplying power.
				faulty: The PSE is faulty
Model				PSE model

display poe interface

Syntax display poe interface [ interface-type interface-number ]

View Any view

Parameter interface-typeinterface-number: Interface type and interface number.

Description Use the display poe interface command to display the power information of the specified interface.

If no interface is specified, the power information of all PoE interfaces is displayed.

Example # Display the state of Ethernet 1/0.

<Sysname> display poe interface ethernet 1/0

Port Power Priority : critical