3Com MSR 50, MSR 30 manual Validate-source-address, Version 1, Undo version

1185

validate-source-address

Syntax validate-source-address

undo validate-source-address

View RIP view

Parameters None

Description Use the validate-source-addresscommand to enable the source IP address validation on incoming RIP routing updates.

Use the undo validate-source-addresscommand to disable the source IP address validation.

The source IP address validation is enabled by default.

Generally, disabling the validation is not recommended.

Examples # Enable the source IP address validation on incoming messages.

<Sysname> system-view

[Sysname-rip] rip 100

[Sysname-rip-100] validate-source-address

version

Syntax	version { 1 2 }
	undo version
View	RIP view
Parameters	1: Specifies the RIP version as RIP-1.
	2: Specifies the RIP version as RIP-2. RIP-2 messages are multicast.

Description Use the version command to specify a global RIP version.

Use the undo version command to remove the configured global RIP version.

By default, the global RIP version is RIP-1.

Note that:

■If an interface has an RIP version specified, the RIP version takes precedence over the global one.