3Com MSR 50, MSR 30 Graceful-restart timer recovery, Undo graceful-restart timer reconnect, 1541

1541

undo graceful-restart timer reconnect

View MPLS LDP view

Parameter timer: Fault Tolerance (FT) reconnect time, in the range 60 to 300 seconds.

Description Use the graceful-restart timer reconnect command to set the FT reconnect time.

Use the undo graceful-restart timer reconnect command to restore the default.

By default, the FT reconnect time is 300 seconds.

Note that:

■The FT reconnect time refers to the maximum time that the stale state flag will be preserved by the LSR after the TCP connection fails.

■Modifying the FT reconnect time may cause all original sessions to be reestablished. LSPs based on the sessions will be removed and need to be reestablished.

Example # Set the FT reconnect time to 100 seconds.

<Sysname> system-view

[Sysname] mpls ldp

[Sysname-mpls-ldp] graceful-restart timer reconnect 100

graceful-restart timer recovery

Syntax graceful-restart timer recovery timer

undo graceful-restart timer recovery

View MPLS LDP view

Parameter timer: LDP recovery time, in the range 3 to 300 seconds.

Description Use the graceful-restart timer recovery command to set the LDP recovery time.

Use the undo graceful-restart timer recovery command to restore the default.

By default, the LDP recovery time is 300 seconds.

Note that:

■The LDP recovery time refers to the maximum time that the stale state label will be kept by the LSR after a TCP reconnection.