3Com MSR 30, MSR 50 manual Peer as-number IPv6 address family view

1244 CHAPTER 82: IPV6 BGP CONFIGURATION COMMANDS

ipv4-address: IPv4 address of a peer.

ipv6-address: IPv6 address of a peer.

number: Specifies the repeating times of the local AS number, in the range 1 to 10. The default number is 1.

Description Use the peer allow-as-loopcommand to configure IPv6 BGP to allow the local AS number to exist in the AS_PATH attribute of routes from a peer/peer group, and to configure the repeating times of the local AS number.

Use the undo peer allow-as-loopcommand to disable the function.

The local AS number is not allowed to exist in the AS PATH attribute of routes by default.

Examples # Configure the repeating times of the local AS number allowed in the AS PATH of routes from peer 1::1 as 2.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] peer 1::1 allow-as-loop 2

peer as-number (IPv6 address family view)

Syntax peer { ipv6-group-name ipv6-address } as-numberas-number undo peer ipv6-group-name as-number

undo peer ipv6-address

View IPv6 address family view

Parameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.

ipv6-address: IPv6 address of a peer.

as-number: AS number of the peer/peer group, in the range 1 to 65535.

Description Use the peer as-numbercommand to specify an AS number for a peer/peer group.

Use the undo peer as-numbercommand to delete the AS number of a peer group.

Use the undo peer command to delete a peer.

By default, no AS number is configured for a peer/peer group.

Examples # Specify the AS number of the peer group test as 100.