3Com MSR 30, MSR 50 manual Display ipx routing-table protocol

2534 CHAPTER 172: IPX CONFIGURATION COMMANDS

Table 660 Description on the fields of the display ipx routing-table verbose command

Field	Description
Routes	Total number of routes
Destination Network ID	Destination network ID of the route
Protocol	Protocol type of the route
Preference	Preference of the route
Ticks	Delay time of the route in ticks (a tick is 1/18 second)
Hops	Hop value of the route
Nexthop	The next hop of the route
Time	Aging time of the route: 0 for directly connected routes and
	static routes, which do not age.
Interface	Address and name of the outbound interface
State	State of the route, which could be active or inactive

display ipx routing-table protocol

Syntax	display ipx routing-table protocol { default direct rip static } [ inactive
	verbose ]
View	Any view
Parameter	default: Displays default routing information.
	direct: Displays direct routing information.
	rip: Displays all IPX RIP routing information.
	static: Displays all IPX static routing information.
	inactive: Displays inactive routing information.
	verbose: Displays detailed routing information, including active and inactive
	routes.
Description	Use the display ipx routing-table protocol command to display IPX routing
	information of the specified route types. Classified active and inactive routes are
	displayed if the inactive and verbose keywords are not specified.
Example	# Display default IPX routing information.
	<Sysname> display ipx routing-table protocol default
	Default routing tables:
	Summary count: 0
	Default routing tables status:<active>:
	Summary count: 0
	Default routing tables status:<inactive>:
	Summary count: 0
	display ipx routing-table statistics