3Com MSR 50, MSR 30 manual Ipx encapsulation, Ipx netbios-propagation, Undo ipx encapsulation

2539

ipx encapsulation

Syntax	ipx encapsulation [ dot2 dot3 ethernet-2 snap ]
	undo ipx encapsulation
View	Interface view
Parameter	dot2: Specifies the encapsulation format as Ethernet_802.2.
	dot3: Specifies the encapsulation format as Ethernet_802.3.
	ethernet-2: Specifies the encapsulation format as Ethernet_II.
	snap: Specifies the encapsulation format as Ethernet_SNAP.
Description	Use the ipx encapsulation command to specify an IPX frame encapsulation
	format for the current interface.
	Use the undo ipx encapsulation command to restore the default IPX frame
	encapsulation format.
	By default, IPX frame encapsulation format is dot3 (Ethernet_802.3).
	The command is only applicable to the layer 3 Ethernet interface and the VLAN
	interface.
Example	# Specify the IPX frame encapsulation format on the interface 1/0 as Ethernet_II.
	<Sysname> system-view
	[Sysname] interface ethernet 1/0
	[Sysname-Ethernet1/0] ipx encapsulation ethernet-2

ipx netbios-propagation

Syntax ipx netbios-propagation

undo ipx netbios-propagation

View Interface view

Parameter None

Description Use the ipx netbios-propagationcommand to enable the interface to forward the type 20 broadcast packets.

Use the undo ipx netbios-propagationcommand to disable the interface from forwarding the type 20 broadcast packets.

By default, type 20 broadcast packets are not forwarded.