3Com MSR 50 Reset counters interface, Example # Configure Ethernet1/0 to work in bridge mode, 171

171

■Only 4SIC-FSW interface cards, 9DSIC-FSW interface cards, and the fixed switching interfaces of 20-21 routers support work mode switching.

■On an MSR series router, you can change the working mode to route mode for up to two Ethernet interfaces.

■After the working mode is changed, all parameters of the Ethernet interface will be restored to the defaults in the current working mode.

Example # Configure Ethernet1/0 to work in bridge mode.

<Sysname> system-view

[Sysname] interface ethernet 1/0 [Sysname-Ethernet1/0] display this

#

interface Ethernet1/0 port link-mode route

#

return

[Sysname-Ethernet1/0] port link-mode bridge

[Sysname-Ethernet1/0] display this

#

interface Ethernet1/0 port link-mode bridge

#

return

n Use the display this command to display the current configurations.

reset counters interface

Syntax reset counters interface [ interface-type [ interface-number ] ]

View User view

Parameter interface-type: Interface type. interface-number: Interface number.

Description Use the reset counters interface command to reset statistics for a specified interface.

To sample network traffic within a period of time for an interface, you need to reset the original interface statistics.

■If neither interface type nor interface number is specified, all interface information will be reset;

■If only interface type is specified, then only information of this particular type of interface will be reset.

■If both interface type and interface number are specified, then only information of the specified interface will be reset.