1633

 

 

mpls te signal-protocol

 

Syntax

mpls te signal-protocol { crldp rsvp-te static }

View

Tunnel interface view

Parameter

rsvp-te: Sets the signaling protocol for MPLS TE tunnel establishment to RSVP-TE.

 

crldp: Sets the signaling protocol for MPLS TE tunnel establishment to CR-LDP.

 

static: Sets up the tunnel using a static CR-LSP.

Description

Use the mpls te signal-protocolcommand to configure the signaling protocol

 

for MPLS TE tunnel establishment.

 

The default signaling protocol for MPLS TE tunnel establishment is RSVP-TE.

 

CAUTION: To use RSVP-TE as the signaling protocol for setting up the MPLS TE

c tunnel, you must enable both MPLS TE and RSVP-TE on the interface for the

 

tunnel to use.

Example

# Adopt CR-LDP as the signaling protocol for establishing MPLS TE tunnel 0.

 

<Sysname> system-view

 

[Sysname] interface tunnel 0

 

[Sysname-Tunnel0] mpls te signal-protocol crldp

 

 

mpls te tie-breaking

 

Syntax

mpls te tie-breaking { least-fill most-fill random }

 

undo mpls te tie-breaking

View

MPLS view, tunnel interface view

Parameter

least-fill: Selects a path with the least bandwidth usage ratio (the used bandwidth

 

to the maximum reservable link bandwidth).

 

most-fill: Selects a path with the most bandwidth usage ratio (the used

 

bandwidth to the maximum reserved bandwidth).

 

random: Selects a path randomly.

Description

Use the mpls te tie-breakingcommand to specify a tie breaker for CSPF to

route a tunnel when multiple paths are present with the same metric. Use the undo mpls te tie-breakingcommand to restore the default. By default, the random keyword applies.

Page 1633
Image 1633
3Com MSR 50, MSR 30 manual Mpls te tie-breaking, Mpls te signal-protocol crldp rsvp-te static, Undo mpls te tie-breaking