3Com MSR 30, MSR 50 manual Explicit-path, List hop

1604 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS

Description Use the enable traffic-adjustment advertise command to enable forwarding adjacency.

Use the undo enable traffic-adjustment advertise command to disable forwarding adjacency.

By default, forwarding adjacency is disabled.

Forwarding adjacency allows OSPF to include static LSP tunnels in SPF calculation but not advertise them to OSPF neighbors.

Example # Enable forwarding adjacency when the IGP protocol is OSPF.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] enable traffic-adjustment advertise

# Enable forwarding adjacency when the IGP protocol is IS-IS.

<Sysname> system-view [Sysname] isis 1

[Sysname-isis-1] enable traffic-adjustment advertise

explicit-path

Syntax explicit-path pathname [ disable enable ]

undo explicit-path pathname

View System view

Parameter pathname: Name of an explicit path for a tunnel, a string of 1 to 31 characters. disable: Disables explicit routing.

enable: Enables explicit routing.

Description Use the explicit-pathcommand to create an explicit path and enter its view. Use the undo explicit-pathcommand to remove an explicit path.

Example # Create an explicit path named path1 and enter its view.

<Sysname> system-view

[Sysname] explicit-path path1

[Sysname-explicit-path-path1]

list hop

Syntax list hop [ ip-address ]