3Com MSR 30 Display users all, All Displays information about users on all user interfaces

2456 CHAPTER 164: USER INTERFACE CONFIGURATION COMMANDS

Table 635 Description on the fields of the display user-interface summary command

Field	Description
User interface type	Type of user interface (CON/TTY/AUX/VTY)
0:X	0 represents the absolute number of the user interface. X
	means this user interface is not used; U means this user
	interface is in use; the number of the character X and U
	indicates the total number of user interfaces.
character mode users. (U)	Number of mode users, that is, the number of character
	U.
UI never used. (X)	Number of user interfaces not used, that is, the number
	of character X.
total UIs in use	Total number of user interfaces in use.

display users

Syntax	display users [ all ]
View	Any view
Parameter	all: Displays information about users on all user interfaces.
Description	Use the display users command to view the user information using the device.
	Use the display users all command to view the user information of all the user
	interfaces supported on the device.
Example	# Display the user information of the current user interface.
	<Sysname> display users
	The user application information of the user interface(s):
	Idx UI	Delay Type Userlevel
	+ 178 VTY 0	00:00:00 TEL	3
	179 VTY 1	00:02:34 TEL	3

Following are more details.

VTY 0 :

Location: 192.168.1.54

VTY 1 :

Location: 192.168.1.58

+: Current operation user.

F : Current operation user work in async mode.

Table 636 Description on the fields of the display users command

Field	Description
Idx	Absolute number of the user interface
UI	The first number and the second number are respectively the absolute index
	and relative index of the user interface.
Delay	Interval since the last input, in the format of hh:mm:ss.
Type	User type, such as Telnet, SSH, or PAD