3Com MSR 50, MSR 30 manual Configuration Commands, Cable, Clock

IMA-E1/T1 INTERFACE

2 CONFIGURATION COMMANDS

cable

Syntax	cable { long short }
	undo cable
View	ATM E1/T1 interface view
Parameter	long: Long haul mode, with a cable length in the range 151 to 500 m (495 to
	1640 ft.).
	short: Short haul mode, with a cable length in the range 0 to 150 m (0 to 495 ft.).
Description	Use the cable command to set the cable length of the ATM E1 interface.
	Use the undo cable command to restore the default.
	By default, long haul mode applies, allowing of cable length mode adaptation. In
	this case, the long haul mode is adopted first. If the cable is of short haul mode,
	the system switches to the short haul mode automatically.
	To have the system use the short haul mode, use the cable short command.
Related command:	frame-format.
Example	# Set the cable length of ATM E1 interface 5/0 to long haul.
	<Sysname> system-view
	[Sysname] interface atm 5/0
	[Sysname-Atm5/0] cable long

clock

Syntax	clock { master slave }
	undo clock
View	ATM E1/T1 interface view
Parameter	master: Sets the clock mode as master.