3Com MSR 30, MSR 50 manual Isdn spid service audio data speech, Undo isdn spid service

588CHAPTER 37: ISDN CONFIGURATION COMMANDS

View	ISDN BRI interface view
Parameter	seconds: Duration of the SPID timer, which is in the range of 1 to 255 seconds,
	and defaults to 30 seconds.
Description	Use the isdn spid timer command to set the duration of the timer TSPID for an
	NI-compliant BRI interface to seconds.
	Use the undo isdn spid timer command to restore the default duration of the
	timer TSPID for the NI-compliant BRI interface.
	On a BRI NI-compliant interface, calls can be placed only after the SPID negotiation
	or initialization is finished. SPID information can be obtained via static
	configuration or dynamic negotiation. The timer TSPID is started when the
	terminal originates a negotiation or initialization request by sending the
	INFORMATION message. You can use this command to modify the duration of
	TSPID.
	This command applies only on NI-compliant BRI interfaces.
Example	# Set the duration of TSPID on the interface BRI 1/0 to 50 seconds.
	<Sysname> system-view
	[Sysname] interface bri 1/0
	[Sysname-Bri1/0] isdn spid timer 50

isdn spid service

Syntax	isdn spid service [ audio data speech ]
	undo isdn spid service
View	ISDN BRI interface view
Parameter	audio: Supports audio service.
	data: Supports data service.
	speech: Supports voice service.
Description	Use the isdn spid service command to configure the service types that must be
	supported in SPID negotiation on the BRI interface adopting NI protocol.
	Use the undo isdn spid service command to delete the service types that must
	be supported in SPID negotiation on the BRI interface adopting NI protocol.
	There are three types of services. You can select any one or none. None means all
	services are supported. By default, SPID needs to support data and voice service
	simultaneously.