3Com MSR 50, MSR 30 manual Display interface bridge-template, 557

		557
0	eth2, 0 snap,
0	dlsw, 0 other,
0	vlan;
Send way:
0	broadcast, 0 fast, 0 other
Discard:
0	by import state,
0	for local frame ,
0	by mac table,
0	by import filter,
0	by outport filter,
0	by ip filter ,
0	other
Table 92 Description on the fields of the display bridge traffic command
Field		Description
Input		Indicates what kinds of and how many frames were received on
		this interface. “10 total, 1 bpdu, 2 single,” means that totally 10
		frames were received on this interface, including one BPDU and
		two unicast packets
Output		Indicates what kinds of and how many frames were sent out on
		this interface
Send way		Indicates how frames were sent
Discard		Indicates why and how many frames were discarded
0 by import state		The number of frames discarded due to abnormal inbound
		interface state
0 for local frame		The number of frames discarded because the source address and
		destination address map to the same interface
0 by mac table		The number of frames discarded due to denied entries configured
		in the bridge table
0 by import filter		The number of frames discarded due to the filtering rules
		configured on the inbound interfaces
0 by outport filter		The number of frames discarded due to the filtering rules
		configured on the outbound interfaces
0 by ip filter		The number of frames discarded due to the filtering rules
		configured at the IP layer
0 other		The number of frames discarded due to other reasons

display interface bridge-template

Syntax display interface bridge-template [ interface-number]

View Any view

Parameter interface-number: Specifies an bridge-template interface.

Description Use the display interface bridge-templatecommand to display the statistics information of a bridge-template interface.

Example # Display the statistics information of bridge-template 1.