3Com MSR 50, MSR 30 manual Information Center Configuration Commands, Display channel

INFORMATION CENTER

163 CONFIGURATION COMMANDS

display channel

Syntax display channel [ channel-number channel-name ]

View Any view

Parameter channel-number: Displays information of the channel with a specified number, where channel-numberrepresents the channel number, in the range 0 to 9.

channel-name: Displays information of the channel with a specified name, where channel-namerepresents the channel name, which could be a default name or one that is defined by the user. The user needs to specify a channel name first before using it as a self-defined channel name. For more information, refer to “info-center channel name” on page 2432.

Table 624 Information channels for different output directions

	Information channel
Output direction	number	Default channel name
Console	0	console
Monitor terminal	1	monitor
Log host	2	loghost
Trap buffer	3	trapbuffer
Log buffer	4	logbuffer
SNMP NMS	5	snmpagent
Log file	9	channel9

Description Use the display channel command to display channel information. If no channel is specified, information for all channels is displayed.

Example # Display information for channel 0.

<Sysname> display	channel 0
channel number:0,	channel name:console
MODU_ID NAME	ENABLE	LOG_LEVEL	ENABLE	TRAP_LEVEL	ENABLE	DEBUG_LEVEL
ffff0000 default	Y	warnings	Y	debugging	Y	debugging
Table 625 Description on the fields of the display channel command
Field	Description
channel number	A specified channel number, in the range 0 to 9.