Technical Bulletin
SoundPoint ® IP, SIP 2.1
Local | Web Server | Specify impossible match behavior, trailing # behavior, |
| (if enabled) | digit map matching strings, and time out value. |
| Navigate to: http://<phoneIPAddress>/appConf.htm#ls | |
|
| |
|
| Changes are saved to local flash and backed up to |
|
| <Ethernet |
|
| Changes will permanently override global settings unless |
|
| deleted through the Reset Local Config menu selection. |
|
|
|
Dial Plan in Application Configuration File
The <dialplan/> attribute is described below and also includes:
•Digit Map <digitmap/> on page 3.
Note | The dial plan is not applied against Placed Call List, VoiceMail, last call return, and |
| remote control dialed numbers. |
|
|
This configuration attribute is defined as follows:
Attribute | Permitted | Default | Interpretation |
Values | |||
|
|
|
|
dialplan.applyToCallListDial | 0, 1 | 0 | This attribute covers dialing from |
|
|
| Received Call List and Missed Call List |
|
|
| including dialing from Edit or Info sub- |
|
|
| menus. |
|
|
| If set to 0, the dial plan is not applied |
|
|
| against the dialed number. |
|
|
| if set to 1, the dial plan is applied |
|
|
| against the dialed number. |
|
|
|
|
dialplan.applyToDirectoryDial | 0, 1 | 0 | This attribute covers dialing from |
|
|
| Directory as well as Speed Dial List. |
|
|
| Value interpretation is the same as for |
|
|
| dialplan.applyToCallListDial. |
|
|
| Note: An Auto Call Contact number is |
|
|
| considered a dial from directory. |
|
|
|
|
dialplan.applyToUserDial | 0, 1 | 1 | This attribute covers the case when the |
|
|
| user presses the Dial soft key to send |
|
|
| dialed number when in idle state |
|
|
| display. |
|
|
| Value interpretation is the same as for |
|
|
| dialplan.applyToCallListDial. |
2
