Administrator’s Guide - SoundPoint® IP / SoundStation® IPAddendum

Attribute

Permitted

Default

Interpretation

Values

 

 

 

 

voIpProt.SIP.outboundProxy.transport

DNSnaptr or

DNSnapt

If set to Null or

 

TCPpre-

r

DNSnaptr:

 

ferred or

 

If voIpProt.SIP.outbound-

 

UDPOnly or

 

Proxy.address is a host-

 

TLS or

 

name and

 

TCPOnly

 

voIpProt.SIP.outbound-

 

 

 

Proxy.port is 0 or Null, do

 

 

 

NAPTR then SRV look-

 

 

 

ups to try to discover the

 

 

 

transport, ports and serv-

 

 

 

ers, as per RFC 3263. If

 

 

 

voIpProt.SIP.outbound-

 

 

 

Proxy.address is an IP

 

 

 

address, or a port is given,

 

 

 

then UDP is used.

 

 

 

If set to TCPpreferred:

 

 

 

TCP is the preferred

 

 

 

transport, UDP is used if

 

 

 

TCP fails.

 

 

 

If set to UDPOnly:

 

 

 

Only UDP will be used.

 

 

 

If set to TLS:

 

 

 

If TLS fails, transport

 

 

 

fails. Leave port field

 

 

 

empty (will default to

 

 

 

5061) or set to 5061.

 

 

 

If set to TCPOnly:

 

 

 

Only TCP will be used.

 

 

 

NOTE: TLS is not sup-

 

 

 

ported on SoundPoint IP

 

 

 

300 and 500 phones.

 

 

 

 

voice.gain.rx.analog.chassis.IP_650

 

0

Gain setting.

 

 

 

 

voice.handset.sidetone.adjust.IP_430

 

-13

Handset sidetone.

 

 

 

 

call.enableOnNotRegistered

0,1

1

If set to 1, calls will be

 

 

 

allowed when the phone

 

 

 

is not successfully regis-

 

 

 

tered.

 

 

 

If set to 0, calls will not

 

 

 

be permitted without a

 

 

 

valid registration. If a

 

 

 

user picks up handset,

 

 

 

presses the New Call soft

 

 

 

key, or presses the

 

 

 

speaker phone, speed dial

 

 

 

or the line keys to get a

 

 

 

dial tone, “Service

 

 

 

unavailable” is displayed.

 

 

 

 

8

Copyright © 2006 Polycom, Inc.

Page 20
Image 20
Polycom Version 2.0.3B manual Attribute Permitted Default Interpretation Values