Polycom Version 2.0.3B manual Billing Code Entry

Technical Bulletin 9268

Billing Code Entry on SoundPoint® IP Phones with Sylantro

This technical bulletin provides detailed information on how the SIP application has been modified for billing code entry when managed by a Sylantro call server.

This information applies to SoundPoint IP phones running SIP application version 2.1 or later.

Introduction

Note This feature is only supported on Sylantro call servers.

Billing codes let administrators assign specific codes to all of their organization’s outgoing calls.

When a SoundPoint IP phone managed by a Sylantro call server is configured to require billing codes, calls are not connected until the a valid billing code is entered.

The modified user interface on a SoundPoint IP phone running SIP 2.1 is described in the following section, Billing Code Entry.

Billing Code Entry

This section describes the steps the user must perform to enter a billing code.

To enter a billing code when placing a call:

1.Do one of the following to a place a call:

a With the handset on-hook, enter the long-distance number (including prefix).

You may need to press the Dial soft key to indicate you are finished entering the number.

bPick up the handset and enter the long-distance number (including prefix).

<December, 2006> 3725-17483-001/A