Technical Bulletin
SoundPoint ® IP, SIP 2.1
Network Configuration Changes
The Network Configuration menu on the SoundPoint IP phone running SIP
2.1 has been modified to include:
•Syslog Menu
To access the Syslog menu:
1.From the idle display on a SoundPoint IP phone, press the Menu key.
2.Using the Down Arrow key and the Select soft key, select Settings > Advanced > Admin Settings > Network Configuration.
You must enter the administrative password to access this menu. The default value is “456”.
3.Using the Down Arrow key and the Select soft key, scroll down to Syslog Menu.
Syslog Menu
The following syslog configuration parameters can be modified on the Syslog menu:
Name | Possible Values | Description |
|
|
|
Server Address | The syslog server IP address or host name. | |
| OR | The default value is NULL. |
| domain name string | |
|
| |
|
|
|
Server Type | None=0, | The protocol that the phone will use to write to the |
| UDP=1, | syslog server. |
| TCP=2 | If set to “None”, transmission is turned off, but the |
|
| server address is preserved. |
|
|
|
Facility | 0 to 23 | A description of what generated the log message. |
|
| For more information, refer to section 4.1.1 of RFC |
|
| 3165. |
|
| The default value is 16, which maps to “local 0”. |
|
|
|
Render Level | 1 to 6 | Specifies the lowest class of event that will be |
|
| rendered to syslog. It is based on |
|
| log.render.level and can be a lower value. |
|
| Refer to Basic Logging <level/><change/> and |
|
| <render/> on page 138 of the SIP 2.0 |
|
| Administrator’s Guide. |
|
|
|
Prepend MAC | Enabled, Disabled | If enabled, the phone’s MAC address is prepended |
Address |
| to the log message sent to the syslog server. |
|
|
|
2
