3Com MSR 50, MSR 30 manual Mpls Basics Configuration Commands, Display mpls fast-forwarding cache

MPLS BASICS CONFIGURATION

95 COMMANDS

n	■ Currently, these interface types support MPLS capability and LDP capability:
	serial interface, async interface, Layer 3 Ethernet interface (Ethernet interface,
	GE interface, and XGE interface), ATM interface, POS interface, Layer 3 virtual
	Ethernet interface (that is, virtual-Ethernet interface), virtual template,
	Mp-group interface, MFR interface, tunnel interface, VLAN interface, and
	virtual dial template (that is, dialer).
	■ Except for the LDP GR feature, all commands in MPLS LDP view are available in
	MPLS LDP VPN instance view. The difference is that the commands serves the
	public network LDP in MPLS LDP view but serves the MPLS LDP VPN instance in
	MPLS LDP VPN instance view.
	■ For information about GR commands, refer to “Basic Configuration
	Commands” on page 2405 and “Information Center Configuration
	Commands” on page 2425.

display mpls fast-forwarding cache

Syntax	display mpls fast-forwarding cache [ verbose ]
View	Any view
Parameter	verbose: Displays detailed information.
Description	Use the display mpls fast-forwarding cache command to display information
	about the MPLS fast forwarding cache.

Example # Display information about the MPLS fast forwarding cache.

<Sysname> display mpls fast-forwarding cache
Fast-Forwarding Cache:		total 2	items
Label	Input_If	Output_If		Len	Flg	Used
1044	GE0/0	E2/0		4	IP	83
1049	E2/0	GE0/0		8	MPLS	81

# Display detailed information about the MPLS fast forwarding cache.

<Sysname> display mpls fast-forwarding cache verbose
Fast-Forwarding				Cache:		total 2	items
Label		Input_If				Output_If		Len	Flg	Used
1044		GE0/0				E2/0		4	IP	15
Fast-Forwarding				Cache PreIpHead:
FF 03		00	21
1049		E2/0				GE0/0		8	MPLS	13
Fast-Forwarding				Cache PreMplsHead:
FF	03	02	81	00 46	40	FE