Zhone Technologies IMACS-200 manual Cross-Connect Actions, Cross-Connect Screen Actions

System Configuration and Operation Cross-Connect Actions

3.14 Cross-Connect Actions

Figure 3-5summarizes the actions you can perform from the Cross-Connect Screen. These actions appear at the bottom highlighted line of the screen.

	Table 3-5. Cross-Connect Screen Actions
Action	Function
Add	Allows you to program additional pass-through cross-connects in the system. If
	mistakes are made during the add process, pressing the up arrow or down arrow
	key will terminate this operation.
uPdate	Initiated by pressing the "p" key. With this command, users can change any of the
	parameters of a pass-through connection. Use the arrow keys to highlight the area
	to be changed and close the transaction using the "s" (Save) command.
dElete	Initiated by pressing the "e" key. Use this command to delete existing
	pass-through connections. The system will prompt users to delete the circuit, and
	the "y" key must be pressed to complete the transaction.
pgUp	Initiated by pressing the "u" key. Since the system can handle many different
	cross-connect circuits, users may exceed a single screen. New pages will be
	added automatically to accommodate additional circuits. The page count feature
	at the top of the screen shows the current page and the total amount of
	cross-connect pages. Use this command to scroll up through the pages of
	cross-connect information.
pgDn	Initiated by pressing the "d" key. This action is similar to the pgUp command.
	Use this command to scroll down through the pages of cross-connect information.
View all or	The View all action is initiated by pressing the "v" key. T
View net
Main	Return to the Main IMACS-200 screen.

System Operation 3-39