OSS
The Out of Synchronization Seconds (OSS) field shows the number of seconds that the WAN BERT has been out of synchronization. Since this is an information only field, there are no user selectable parameters.
BER
The Bit Error Rate (BER) field shows the rate at which errors are being logged. The system calculates BER by dividing the number of bit errors (BE) by the total number of bits transmitted during the test. Since this is an information only field, there are no user selectable parameters.
ELAP
The Elapsed time setting shows the running tally of the total number of seconds during the test. Since this is an information only field, there are no user selectable parameters.
LB ST
The Loopback State setting changes when a WAN unit is both present and operational. This includes loopbacks caused by commands from remote devices as well as loopbacks caused by local settings. The field will show payld (payload loopback) when the entire signal, excluding the framing bit, is looped back. The field will show line (line loopback) when the entire signal is looped back towards the network. This field will show local (local loopback) when the entire signal is looped back to the ports own transmitter. It will show none if the OWAN port is not in loopback.
| OWAN Ports |
