10.2.2 OHSU port Cables

The OHSU port utilizes 50 um or 62.5 um optical fiber cables with BFOC12.5 (ST) connectors. A separate transmit and receive fiber is required for each port.

10.3 OHSU port User Screens and Settings

The OHSU ports permit configuration and operation through use of several user screens and optional settings.

10.3.1 OHSU port Main Screen

You must configure the OHSU port ports for operation. Configuration can be performed from the OHSU port Main Screen, which is shown in Figure 10-2.To access that screen, highlight the desired port in the System Main Screen and press <Enter>.

Figure 10-2.Typical OHSU port Main Screen

The bottom highlighted line on this screen lists several actions you can perform from the screen. To perform an operation, simply press the uppercase letter associated with the desired action. For example, to save your option settings, type “s”. Table 10-1lists the actions you can perform.

10-2

OHSU Ports

Page 204
Image 204
Zhone Technologies IMACS-200 manual Ohsu port User Screens and Settings, Ohsu port Cables, Ohsu port Main Screen