Zhone Technologies IMACS-200 manual Network Statistics Screens, Typical Network Statistics Screen

Remote Administration IMACS-200 General Features

b.Telnet [device IP address]

12.From the IMACS-200:

a.Ping PC on IP network

13.From a PC on a different network than the IP network:

a.Ping [device IP address]

b.Telnet [device IP address]

14.From the IAD, Ping PC on the network different from IP subnetwork.

4.7.2Network Statistics Screens

The Network Statistics Screens provide maintenance and diagnostic information for the different protocols supported by this equipment. The system starts accumulating statistics when the TCP/IP Port is changed from off to local or wan, and it continues to store information until it is turned off.

Figure 4-15shows the first of eight Network Statistics Screens, and Figure 4-15throughFigure 4-17show the other three screens. To go to the first screen, press “n” in the TCP/IP Screen to choose Netstat from the bottom line of that screen. Table 4-10lists the actions that can be taken from the Network Statistics Screens, and the following paragraphs describe the parameters in each screen.

Figure 4-15.Typical Network Statistics Screen, Page 1

4-24 General Features