Zhone Technologies IMACS-200 manual Network Statistics Screen Actions, IP Parameters, Default TTL

Remote Administration IMACS-200 General Features

	Table 4-10. Network Statistics Screen Actions
Action	Function
pgUp	Scrolls backward through network statistics, one page at a time. If you are
	on the first screen (Page 1), automatically “wraps around” back to the fourth
	screen (Page 4).
pgDn	Scrolls forward through network statistics, one page at a time. If you are on
	Page 4, automatically “wraps around” back to Page 1.
Refresh	Since the system does not update statistics automatically, the Refresh
	command must be used to update information in statistics fields.
Main	Returns to the TCP/IP Screen. If changes are made to settings and not
	saved, you will be prompted to save or lose changes.

4.7.2.1IP Parameters

The IP parameters appear in the first Network Statistics Screen (Figure 4-15). These are described below.

Default TTL

The Default TTL field shows the Time To Live for information packets from transmission to delivery. The TTL for this system is 255 seconds.

Datagrams Received

The Datagrams Received field shows the number of IP datagrams (packets) received by the local system from the network host.

Datagrams Disported

The Datagrams Disported field shows the number of datagrams that were disported by the local system.

Datagrams Delivered Above

The Datagrams Delivered Above field shows the number of datagrams sent to the TCP layer of the network host to the local system.

Datagrams From Above

The Datagrams From Above field shows the number of information or traps sent by the local system to the UDP or TCP layer of the network host.

4-26 General Features