Zhone Technologies IMACS-200 manual Default Group Permissions, Wan

IMACS-200 General Features CPU User Screens and Settings

When the system is first commissioned, or after a ZIP function, the user group defaults to the following configuration:

Table 4-5. Default Group Permissions

Provisioning

Provisioning

User Group

Number

WAN

WAN

Alarms

WAN PMs

Access

Access

Alarms

Access PMs

Administer

System

Administer

Users

1

RW

RW

RW

RW

RW

RW

RW

RW

2 - 32

R

R

R

R

R

R

R

R

User group 1 is the "Superuser" and its attributes are not provisionable. User groups 2 to 32 default to R in all attributes. They can have any one of 3 possible values entered into the various cells of the user group table:

N = None. When "N" is entered in a section of the user group definition, users with that group have no access to that part of the system, including its UI

R = Read Only. When “R” is entered in a section of the user group definition, users with that group have read (or view) access to that part of the system, including its UI. However, they can not make any changes or edits.

RW = Read/Write access (full access). When "RW" is entered in a section of the user group definition, users with that group have read, write, and edit access to that part of the system, including its UI

WARNING!It should be noted that users with the ability to Administer Users will be able create new accounts with read/write access to ALL categories. Care should be exercised in providing access to the Administer Users function.

To change a password, first log into the system under a user who has the RW capability assigned to Administer Users, or the admin level. Enter the CPU level, as shown in Figure 4-2 on page 4-2.Enter N for userNames, and a screen such as Figure 4-3appears.

General Features 4-5