Zhone Technologies IMACS-200 manual Cross-Connecting WAN Time Slots, Cross-Connect Screen

Cross-Connecting WAN Time Slots System Configuration and Operation

3.13 Cross-Connecting WAN Time Slots

After assigning the user ports to DS0 time slots, you can also assign the remaining WAN time slots for pass-through cross-connections betweenT1 links.

You can cross-connect WAN time slots from the System Main Screen. To perform cross-connections, press “x” in that screen to invoke the Xcon command. The Cross-Connect Screen in Figure 3-23appears. In the cross-connect screen, type “a” to add a cross-connect circuit. The Add command provides the fields used to program all of the "pass-through" circuits in the network (See Figure 3-24). Table 3-4lists the circuit parameters and their options and default settings.

Figure 3-23.Cross-Connect Screen

Figure 3-24.Add a Cross-Connect Circuit Screen

3-32 System Operation