TS10 INSTALLATION
Connection
The illuminite lighting elements of your TS series products provide you with a unique custom touch to your vehicle. Dual’s patent pending illuminite bulb system and control circuitry provides an extraordinary
The lighting features of all illuminite products require a 12 volt DC power source to operate. The speaker has two distinct sets of input terminals. The first is labeled audio input terminals and the second is labeled illuminite lighting inputs. The inputs are clearly marked with a label positioned directly above the terminal housing. The polarity (+ and
1.Do not connect Amplifier or any audio source to illuminite lighting inputs. Inputs are designed for switched 12 volt DC power source only.
2.See fig. 1a, (illustrates wiring diagram) be sure to maintain polarity. Be sure to connect to a constant switched 12 volt DC source. Correct connection would be the positive (+) 12 volt wire to the Positive (+) illuminite Lighting input terminal and connect the Negative
Notice: The Illuminite™ series LED illumination elements are not removable. There are no serviceable parts inside or attached to the speaker assembly. The Illuminite™ series products are sensitive electronic devices. Removal or tampering with any part or portion of the speaker and/or its assemblies will damage the product and void the limited warranty.
Wiring
Connect the tweeter as shown in the wiring diagram. Improper connections will cause damage not covered by the product warranty.
Red | Mounting | |
Black | Tweeters have been designed for flush, | |
| surface or 30 degree mounting. Flush | |
| mounting, which provides a custom | |
| appearance, requires 1" of clearance behind | |
| mounting surface. If sufficient clearance is not | |
- | available, the included mounting kit allows | |
tweeter to be mounted to the surface of the | ||
Amplifier | ||
+ Output | vehincle's interior. Tweeters can be mounted | |
straight or at an angle depending on the | ||
| ||
| adapter selected. | |
|
| |
| 3 |
