3.Press the Cover Mounts (106) on the underside of the Rear Stabilizer Cover (15) into the Rear Stabilizer (2).
4.Tip: Avoid pinching the wires. Avoid damag- ing the indicated plastic tabs. Set the Upright
(4) on the Frame (1).
Attach the Upright (4) with four M10 x 25mm Screws (99) and four M10 Split Washers (105).
Do not fully tighten the Screws yet.
3 |
15 |
2 |
106 |
4 |
Avoid pinching the
wires and avoid
damaging the tabs
4
99
105
99
105
1
Tabs
7
