9.Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (101).
10.Orient the Right Pedal Arm (58) assembly as shown.
Apply grease to the axle on the Right Pedal Arm (58).
Attach the Right Pedal Arm (58) to the Right Roller Arm (59) with an M8 x 13mm Screw (82), a Small Axle Cover (55), and an M8 Washer (97). Tip: Avoid damaging the Small
Axle Cover when tightening the Screw.
Repeat this step for the Left Pedal Arm assembly (not shown).
9 |
|
| 7 |
| Avoid pinching |
| the wires |
4 | 101 |
| |
101 |
|
10 |
|
82 55 59
97
58
Grease
10
